Windsor Radius Mini Operations Instructions download pdf (Page 5)

English 5

– Protect the charger against moisture;

store it dry. The appliance is suitable

for use only in rooms; do not expose the

appliance to rain.

When unpacking the product, make sure

that no accessories are missing and that

none of the package contents have been

damaged. If you detect any transport dam-

ages please contact your dealer.

Note: Please refer to page 2 for figures of

the appliance and the operation.

1 Cardan joint with lock

2 ON/OFF foot switch

3 Rechargeable battery, detachable

4 Unlocking button, battery

5 Dirt container, detachable

6 Unlocking mechanism for dirt container

7Casing

8 Brush roller, changeable

9 Unlocking button for brush roller

10 Telescopic strut, adjustable height

11 Turning handle for height adjustment

12 Handle

13 Charger with charging status display

and charging cable

see Figure 2

The telescopic strut consists of 3 parts.

While assembling it, make sure that the

parts lock into each other.

Î Insert the handle on the longer strut

with turning handle.

Î Insert together the longer and shorter

struts; while assembling it, press the

locking button.

Î Insert the entire strut with the locking

button into the joint on the appliance.

Î Loosen the handle and pull out the strut

to the desired working height; turn the

handle to the correct position and tight-

en using the turning handle.

see Figure 3

The battery is not charged at the time of de-

livery. Charge it before commissioning the

appliance and then as and when required.

Note

The battery can be charged only when it is

removed out of the appliance.

Î Connect battery with charger using the

charger cable.

Î Insert the charger delivered with the ap-

pliance into a proper socket.

The charger display glows red. The battery

is being charged.

Note

– The charging time for an empty battery

is approx. 12 hours.

– If the charging time is exceeded, the

charger shifts to retention charging.

The charger display continues to glow

red.

see Figure 4

Î Insert the battery into the intake and

lock it.

see Figure 5

The Cardan joint can be locked to clean

high-fiber carpets to prevent the telescope

strut from moving from side to side.

– Lock/unlock telescope strut on the side:

Î Activate the lock, then move it down

and lock it in.

– Unlock telescopic strut:

Î Activate the lock, then move it up and

lock it in.

Symbols on the machine

Start up

Description of the Appliance

Installing the telescopic handle and

the handle and adjusting the height

Charge the battery

Insert the battery

Operation

Lock/unlock telescope strut on the

side

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comments to this Manuals

No comments