Windsor Clipper CLP12IB User Manual download pdf (Page 22)

TROUBLESHOOTING CHART

86038280 04/04/07

4-4ENG

PROBLEM CAUSE SOLUTION

No Power, Nothing

Runs

1. Is the cord plugged in?

2. Circuit breaker tripped in building.

3. Faulty switch.

4. Faulty power cord or pigtail.

1. Plug in cord.

2. Reset breaker

3. Call for service.

4. Call for service.

Vacuum Motor Will Not

Run

1. Vacuum circuit breaker tripped.

2. Faulty main vacuum switch.

3. Loose wiring.

4. Faulty vac motor.

1. Reset breaker

2. Call for service.

3. Call for service.

4. Call for service.

Vacuum Motor Runs

But

Suction Is Poor

1. Debris lodged in vac shoe.

2. Dome gasket defective or missing.

3. Vacuum hose cracked or hose cuff

loose.

4. Recovery tank full / float ball stuck in

the up position.

1. Remove debris from vac shoe.

2. Replace as necessary.

3. Replace or repair as necessary.

4. Turn off vac motor. Drain and rinse

recovery tank.

Poor Or No Water Flow

(Carpet Is Streaky)

1. Main pump switch off.

2. Jets clogged or missing.

3. Solution filter clogged.

4. Faulty solenoid.

1. Turn on.

2. Clean using a vinegar /water

solution or replace.

3. Drain solution tank and clean

solution filter.

4. Call for service.

Brush Does Not Spin

1. Brush switch off.

2. Brush circuit breaker tripped

3. Brush belt broken.

4. Faulty brush motor.

1. Turn on brush switch.

2. Reset circuit breaker.

3. Replace as necessary.

4. Call for service.

1 2 ... 17 18 19 20 21 22 23

Comments to this Manuals

No comments